EPE perimeter strip
The EPE perimeter strip is made of expanded polyethylene of closed cell structures. It is used to prevent the dispersal of impact sound at the joint screed - wall. The partially self-adhesive back side easily glues to the wall, an additional...
More about product
Pipe for radiant heating PE/XC
Pipe PE-XC has four layers (SDS4 +). It is made of a physically cross-linked polyethylene (PEHD-Xc) with a diffusion barrier of EVOH (ethyl-vinyl-alcohol) in accordance with DIN 16892/93 and DIN 4726. It is intended for radiant heating together with...
More about product
Multilayer pipe PE/Al/PE
Multilayer pipe PE/AL /PE, composed of PE, adhesive Al, adhesive, PE, is intended for floor, wall and ceiling heating or cooling. An aluminum layer without overlaps is welded on.
More about product
Pipe clip by hand
Pipe clip by hand is intended for further tightening of pipes for floor heating onto system panels and installation of pipes in a diagonal direction with respect to the grid of knobs; inserted by hand.
More about product
Pipe clip by machine
Pipe clip by machine is intended for attaching pipes for underfloor heating system panels, using tools for insertion of pipe clamps (“tacker gun”).
More about product
Pipe clip for reinforcing mesh
Pipe clip for reinforcing mesh is used for attaching pipes for underfloor heating to the reinforcing mesh.
More about product
Manifold FRTS1
The stainless steel manifold FRTS1 is made of a feeding (control) distribution pipe with precise regulators-flow indicators (Regolux HSG - 0.5 l/min) and connectors, and a return (thermostatic) distribution pipe with thermostatic valves and...
More about product
Connectors "Eurocone"
Connectors ” eurocone” for connecting pipes of different diameters to the manifolds; no special tools required.
More about product
In-wall distribution box UPS
The in-wall distribution box UPS is made of galvanized sheet metal, doors and visible framework are white. The compact whole is put together before installation. It is suitable for installation in all types of walls (brick, concrete,...
More about product
Mixing unit M2
The mixing unit M2 is intended to provide adequate temperature in underfloor heating systems in combined systems of radiators and underfloor heating. It consists of connecting tubes of stainless steel , circulation pumps, a thermostatic valve with...
More about product
Boiler Set HK1
The boiler Set HK1 is a direct boiler set from stainless steel V2A (1.4301) in an insulating casing from EPP, with pump. It is intended for the direct rising conduit to the heating distributors or to other heat sources. It consists of two ball...
More about product
Boiler Set MK1
The boiler Set MK1 is a mixing boiler set with a three-way valve and bypass, from stainless steel V2A (1.4301) in an insulating casing from EPP, with pump. Intended for for the mixing rising conduit to the heating distributors or to other heat...
More about product
Boiler distributor
Boiler distributor from stainless steel V2A (1.4301) is in an insulating casing from EPP with carriers for wall mounting. Different sizes allow for connection of 2 to 5 boiler sets.
More about product
Room thermostat
Room thermostat controlled by an electric drive of the valve for regulating the floor heating to the desired room air temperature. Temperature can be set in the range of 5 to 30 °C, operating voltage is 230 V.
More about product
Electric drive
Electric drive (of the head) of the valve for regulation of single loops of floor heating, use in conjunction with a room thermostat. The operating voltage is 230 V.
More about product
YOUR PARTNER
The brand FRAGMAT, a concept of quality and tradition.
More information
TRADITION
By developing new programs and new technologies we have built up a successful brand.
More information
QUALITY
We operate in accordance with the guidelines of an established and certified management system.
More information
ENVIRONMENT
We are focused on mastering regulatory requirements and reducing our impact on the environment.
More information