Thermal Insulation // EPS Construction Boards

The perfect solution for insulating floors, various flat roof systems as well as attics and special facilities such as cool stores. We offer a wide range of expanded polystyrene construction panels, as the final choice depends on the intended use as well as the expected loads.

Products

FRAGMAT EPS 50

Cut boards from expanded polystyrene Cut boards from expanded polystyrene FRAGMAT EPS 50 are used for thermal insulation in places where no load bearing capacity is required (attics, floorings and other places with lower load), facades covered with facade bricks… The boards are installed according to their use either by gluing, mechanical attachment, or by … Continued

FRAGMAT EPS 70

Cut boards from expanded polystyrene The cut boards from expanded polystyrene FRAGMAT EPS 70 are used for floors with thermal insulation of lower thickness and smaller loads and for attics, facades covered with facade bricks… The boards are installed according to their use either by gluing, mechanical attachment, or by placing them freely . During … Continued

FRAGMAT EPS 100

Cut boards from expanded polystyrene The cut boards from expanded polystyrene FRAGMAT EPS 100 are used for thermal insulation of floors, flat roofs, attics, floor heatings, cold stores. Boards are installed according to their use either by gluing, mechanical fixing, or by placing them freely . During installation we must follow the installation instructions and … Continued

FRAGMAT EPS 120

Cut boards from expanded polystyrene The cut boards from expanded polystyrene FRAGMAT EPS 120 are used for thermal insulation of floors, flat roofs, attics. The boards are installed according to their use either by gluing, mechanical attachment, or by placing them freely. During installation we must follow the installation instructions and applicable professional and legal … Continued

FRAGMAT EPS 150

Cut boards from expanded polystyrene The cut boards from expanded polystyrene FRAGMAT EPS 150 are used for thermal insulation of flat roofs (higher loads, pedestrian and service areas), floors with higher thickness of thermal insulation, floors with high loads, insulation of cold attics with occasional pedestrian bearing surface. The boards are installed according to their … Continued

FRAGMAT EPS 200

Cut boards from expanded polystyrene The cut boards from expanded polystyrene FRAGMAT EPS 200 are used for thermal insulation of flat roofs, floors with a large load, underfloor heating, cold stores. The boards are installed according to their use either by gluing, mechanical attachment, or by placing them freely. During installation we must follow the … Continued

FRAGMAT NEO SUPER 100

Boards with improved insulation properties The cut boards from EPS with better insulation properties FRAGMAT NEO SUPER 100 are used for thermal insulation of floors, flat roofs, attics, floor heating, cold stores. The boards are installed according to their use either by gluing, mechanical attachment, or by placing them freely. During installation we must follow … Continued

EPS SILENT T650

Elasticated EPS boards for protection against impact sound The elasticated EPS boards EPS SILENT T650 are used for impact sound insulation in the system of floating floors. The boards are laid freely and continuously regardless of the installation method, on the surface with prior thermal insulation EPS 100, or directly on the concrete structure. During … Continued

EPS SILENT T1000

Elasticated EPS boards for protection against impact sound The elasticated EPS boards EPS SILENT T1000 are used for impact sound insulation in the system of floating floors. The boards are laid freely and continuously regardless of the installation method, on the surface with prior thermal insulation EPS 100, or directly on the concrete structure. During … Continued

STIROTRAK

Elasticated EPS strip Elasticated EPS strips STIROTRAK are used for impact sound insulation and as a separator sheet between floor and circumferential walls (narrow strips) or for impact sound insulation in floating floors (strip width of 50 to 100 cm). Stirotrak is installed according to its use by mechanical attachment, PU adhesives or by placing … Continued

prev
    next