FRAGMAT EPS 150

FRAGMAT EPS 150

Cut boards from expanded polystyrene

The cut boards from expanded polystyrene FRAGMAT EPS 150 are used for thermal insulation of flat roofs (higher loads, pedestrian and service areas), floors with higher thickness of thermal insulation, floors with high loads, insulation of cold attics with occasional pedestrian bearing surface. The boards are installed according to their use either by gluing, mechanical attachment, or by placing them freely. During installation we must follow the installation instructions and applicable professional and legal regulations.

Characteristics

  • compressive stress 150 kPa (10% def.)
  • standard SIST EN 13163
  • reaction to fire E after EN 13501-1
  • suitable for thermal insulation of flat roofs (higher loads, walking and service areas), floors with thicker thermal insulation, floors with heavy wear, insulation of cold attics only walked on occasionally etc.
  • thermal conductivity λD= 0,034 W/(m.K)

Specification

thickness of boards1 cm - 30 cm
size of boards100 × 50 cm
unit of measurem2

Packaging

packages in PE-film: approx. 0,25 m3
pallet: approx. 5 m3