Cold basic bitumen coating for road structures IBITOL E-5 is used as a basic bituminous coating for the implementation of single- and double-layer waterproofings of bridge structures on roads. It is applied with a roller or by spraying onto a clean, dry and dusted surface. Usage of the coating is from 0,2 to 0,3 l/m2. … Continued
Parking areas, platforms, bridges
For professional waterproofing of car parks, platforms, bridges and similar specific projects, we produce dedicated bitumen coatings, adhesives and bitumen membranes that meet the highest standards.
Modified adhesive bitumen compound BITU M is used for hot gluing of bitumen membranes on bridge structures. It is applied by pouring the hot compound under the bitumen membrane. Usage of the compound has an average of 2,5 kg/m2. The compound is prepared in special cauldrons with a mixer and by indirect heating. Heating over … Continued
Bitumen membrane for road structures The waterproofing bitumen membrane IZOTEKT P5 M is used for horizontal waterproofing of bridge structures. It is applied to the prepared surface with IBITOL E-5 by completely torching the membrane surface with a gas burner or by gluing with the hot bitumen adhesive BITU M. The membrane has on both … Continued
BITU E is a compound of bitumen modified with elastomer additives. It is used for hot bonding of elastomere bitumen membranes. It is applied by pouring the hot compound under the bitumen membrane. The easily fusible polymeric sheeting on the membrane must be removed in this case. Usage of the compound has an average of … Continued
PRIMER S is a polymer coating based on fast-drying organic solvents. It is applied with a roller. Consumption depends on the absorbency of the substrate and ranges from 0.20 to 0.50 L/m2. The drying time depends on layer thickness and weather conditions, ranging from half an hour to one hour. Use: Impregnation of metal, wood and concrete … Continued
ELASTIBIT S is a bitumen compound with elastomeric additives for greater flexibility and artificial resins for better adhesion to the substrate. It is applied with a roller. Consumption depends on the absorbency of the substrate and ranges from 0.20 to 0.50 L/m2. The drying time depends on layer thickness and weather conditions, ranging from half … Continued