Waterproofing // Self-adhesive bituminous membranes

Single-sided self-adhesive bitumen membranes with a thickness of 3 mm are primarily used for double-layered flat roof systems. They are installed directly on the EPS thermal insulation panels.

Products

IZOSELF V3

Self-adhesive bitumen membrane for foundations The waterproofing bitumen membrane IZOSELF V3 is used to carry out waterproofing of basements against moisture. The membrane is installed in such a way that during unrolling the easy removable siliconized film is removed while pressing it at the same time to the surface. To achieve immediate adhesion hot air … Continued

IZOSELF T3

IZOSELF T3 is used for horizontal waterproofing against soil moisture, as a first layer in double-layer waterproofing and for installing directly on EPS or XPS panels. Installed without welding, using hot air thermal activation if required. The membrane is protected by a fusible film on top and a removable film on the bottom. Characteristics reinforcement: … Continued

IZOSELF P3

Self-adhesive bitumen membrane for flat roofs and foundations IZOSELF P3 is used for horizontal waterproofing of substructures against moisture, in multilayer waterproofing systems of substructures against hydrostatic pressure if the second layer of waterproofing is installed by welding, and in two- or multilayer flat roof systems as the bottom or intermediate layer. The membrane is … Continued

IZOSELF P4

Self-adhesive bitumen membrane The IZOSELF P4 self-adhesive bitumen membrane is used for single-layer waterproofing against soil moisture and for double-layer flat roof systems as a bottom layer. It is protected by an easily removable silicone film on the bottom and by an easily fusible PE film on the top. It is installed by removing the … Continued

IZOSELF P3 duo

Self-adhesive bitumen membrane for flat roofs and foundations IZOSELF P3 DUO is used to make single-layered waterproofing of the base plate of structures, where the double-sided self-adhesive bitumen membrane is laid in between two layers of thermal insulation. At the beginning the first thermal insulation layer is laid, then the bitumen membrane, while removing the … Continued

IZOSELF PE plus

Self-adhesive bitumen membrane for foundations – installation without welding IZOSELF PE plus is a self-adhesive waterproofing membrane made of fibreglass, coated with a thin layer of high-quality elastomer-modified bitumen on both sides. The membrane is protected with a strong protective PE film on top and with a removable silicone film on the bottom. It is … Continued

prev
    next